Toll Free: 1 (877) 442-9964 or 1-504-564-7456

Lost Keys? Lost Combinations? Click here

  • My Cart

    Your cart is empty

    You have no items in your shopping cart.

How to Install Gardall Wall Safe Models

recessed mount
Recessed Mount

  • Safe is recessed approx. 1 1/2" inside flange
  • Must use back holes on all 4 sides

Flush mount
Flush Mount

  • Safe front is flush with flange
  • Use back holes for top and bottom
  • Use either back holes or front holes for sides

Flange Install 

Please Note:

  • Flange does not mount to the wall, 
    ONLY to body of safe.

  • Flange is for cosmetic use only. Safe must be anchored independent of flange

1) After deciding on a location for the safe on the wall, locate the studs in that area either with a stud detector or by tapping the wall to find the hollows

2) Mark the inside edge of the studs to determine their location. Using those marks as your left and right outer edge of the safe - draw in the top and bottom edge of the safe so that you have a square the height and width of your safe (do not include the flange in these dimensions). Cut your hole on the inside of these lines about 1/2" in to allow for error or breaking of wall unevenly. Once you have cut the wall you can look in to make sure you are between the studs. Finish cutting wall and use your safe to insure a snug fit.

IT IS IMPORTANT TO TEST THE SAFE. Close and lock the door of the safe.  When you pull on the dial toward you and push in on the dial toward the safe, there should be play in the door (A loose fit). The play in the door prevents pressure on the locking bolt that might cause the safe to stick shut.

YOU WANT THE SAFE TIGHT BETWEEN THE STUDS? If the safe doesn't fit and the hole is too small, gradually shave a little off the studs until the fit is comfortable.

If you are installing a wall safe with a flange, no finishing of the wall is required for neatness. If your safe has no flange, the hole you have cut could be framed for a professional finish, keeping in mind that the safe should be concealed behind a picture or mirror that must lie flush against the wall in order not to look suspiciously obvious.

One Advantage of a Wall Safe is that it is Easy to Conceal

 A wall safe is the easiest to hide of all safes. By concealing your wall safe a burglary is less likely to find it. Wall safes are built so that when they are set in a wall they are flush or almost flush with the wall. Because it is flush with the wall, it is easy to hang a photograph or painting or print over the door of the safe. We have seen interior decorators create a fabric decoration to conceal a wall safe. If you install your wall safe in a closet, you can chose a location so clothes can hang in front of it and conceal it.  An attached garage can be a good place to conceal a wall safe. Note that if the purpose of your wall safe, is for quick access to a handgun you may want to install it in the most convenient place possible and not have anything blocking your access such as a heavy painting or mirror.